How to use VVDI2 program BMW FEM/BDC keys

浏览上一个主题 浏览下一个主题 向下

How to use VVDI2 program BMW FEM/BDC keys

帖子 由 Admin 于 周四 八月 17, 2017 11:49 am

VVDI2 4.3.0 http://www.xhorsevvdi.com/wholesale/vvdi2-key-programmer.html now is verified to work no issues with the BMW FEM/BDC system.Here is simple guide about VVDI2 Program BMW FEM/BDC Keys.

If you have condor mini key cutting machine,provide your serial number,add VVDI2 BMW FEM/BDC authorization price http://www.xhorsevvdi.com/wholesale/vvdi2-bmw-fem-bdc-function-authorization-service.html is 600USD.If without condor key cutting price is 800USD.

VVDI2 BMW 4.3.0 Learn keys & Erase keys to the BMW FEM/BDC system

step 1:

1. read FEM/BDC coding via OBDII or on the bench

2. you'd better not close this window after starting this procedurestep 2:

1. open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer

2. load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip

3. restore FEM/BDC shell, provide -12v and connect it via OBDstep 3:

1. this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2

2. provide +12v to FEM.BDC and connect it via OBDstep 4:

1. open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip

2. restore FEM/BDC shell and connect it via OBDstep 5:

loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erase the key position become blank position)

4.support backup coding

5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first

3.in FEM/BDC inte***ce, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW

4.when operation on 'programming FEM/BDC system'inte***ce,please don't close this software window until all procedures completed.

5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car

or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

Reset KM to the BMW FEM/BDC system

Have backup coding, restore coding of the FEM/BDC system

Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer @xhorsevvdi.com for help!

1.VVDI2 BMW FEM/BDC Function Authorization Service:
http://www.xhorsevvdi.com/wholesale/vvdi2-bmw-fem-bdc-function-authorization-service.html

2.VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only:
http://www.xhorsevvdi.com/wholesale/vvdi2-bmw-bdc-authorization-service-for-condor.html


original article: How to use VVDI2 program BMW FEM/BDC keys

http://blog.xhorsevvdi.com/how-to-use-vvdi2-program-bmw-fembdc-keys/

Admin
Admin

帖子数 : 112
注册日期 : 17-03-28

查阅用户资料 http://xhorsevvdi.666forum.com

返回页首 向下

浏览上一个主题 浏览下一个主题 返回页首


 
您在这个论坛的权限:
不能在这个论坛回复主题