CGDI BMW Reset BMW FEM/ BDC Odometer 95256
第1页/共1页
CGDI BMW Reset BMW FEM/ BDC Odometer 95256
This post is available with how to use CGDI BMW to reset mileage for BMW FEM/BDC Anti-theft module.
The raw car mileage is 101024 KM
The position of BDC anti-theft box is in the co- pilot position
BDC appearance style
There is 95256 chips on the BDC module, which will be used during operaion
Connect the BDC module to the platform and follow the software prompts
Open CGDI BMW software
Select BMW key Match (OBD)-> FEM/BDC Key Match
Click “ view help”
It prompts “The current FEM/BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power, please keep the equipment cable connection during the programming. Whether to continue?”
Click “yes”
Select the second way to read EEPROM “
Use EEPROM adapter to read FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”
Create a new folder to save the EEPROM data read out
Install the FEM/ BDC into the car(the chip holder must be removed from the chip) and click the “next” button
Programming ECU...
Select the second way to write EEPROM
Use EEPROM adapter to write FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”
Remove the chip clip from the chip
Write data successfully
Coding succeed
Click on “Mileage Reset”
A message appears “ The car mileage will be restored to 0”
Click on “ok” to the next step
CGDI BMW key programmer reset BDC anti-theft module mileage successfully and you can change the meter mileage to the number you need
Thanks.
The raw car mileage is 101024 KM
The position of BDC anti-theft box is in the co- pilot position
BDC appearance style
There is 95256 chips on the BDC module, which will be used during operaion
Connect the BDC module to the platform and follow the software prompts
Open CGDI BMW software
Select BMW key Match (OBD)-> FEM/BDC Key Match
Click “ view help”
It prompts “The current FEM/BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power, please keep the equipment cable connection during the programming. Whether to continue?”
Click “yes”
Select the second way to read EEPROM “
Use EEPROM adapter to read FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”
Create a new folder to save the EEPROM data read out
Install the FEM/ BDC into the car(the chip holder must be removed from the chip) and click the “next” button
Programming ECU...
Select the second way to write EEPROM
Use EEPROM adapter to write FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”
Remove the chip clip from the chip
Write data successfully
Coding succeed
Click on “Mileage Reset”
A message appears “ The car mileage will be restored to 0”
Click on “ok” to the next step
CGDI BMW key programmer reset BDC anti-theft module mileage successfully and you can change the meter mileage to the number you need
Thanks.
第1页/共1页
您在这个论坛的权限:
您不能在这个论坛回复主题